Water-based tough coloured hard wearing finish

Amazing tough high build epoxy coating for walls and floors. Silk Gloss. Use on any surface including damp concrete to get a tough coloured hard wearing finish. Available in RAL 6018 Yellow Green only. Water based and very very easy to use.

View the colour available here ...colour when ordering. Use this product for all locations where you require a hard wearing dust free coating.  It can be used to paint over screeds, concrete, timber, plasterboard, bitumen, tarmac, most other paints.

DIY Applications

• Garage floors
• Workshop floors
• Utility room floors

Professional Applications

• Aircraft hangar floors
• Car park floors
• Car showroom floors
• Warehouse floors
  

Features

• Very Fast drying
• No primer needed
• Clean tools with water
• Silk finish
• Solvent free
• Very easy to apply
• Good chemical resistance
• Slip resistant additive available

How to Step-by-Step

1. Clean up the floor, remove dust, oil or grease which may reduce the bond.
2. Open the base and hardener components using pliers.
3. Thoroughly mix the two together with a drill and paddle paint mixer.
4. Apply by short pile roller to the floor.
5. Clean tools with water.

The paint will be touch dry in 2 hours and ready for foot traffic in 8 hours. Normally 2 coats is advised for the best finish. Allow to dry between coats.