Amazing epoxy paint for all floors

Remmers Epoxy PH is an amazing epoxy paint for all floors. Flexible, tough, resistant and with a high gloss. As a roller coating this epoxy is very economic way to protect concrete floors.

TIP: Can be accelerated to harden in 4 hours by adding the Accelerator PH - available seperatley.

General purpose high quality 2 pack epoxy floor coating to be used on factory, garage and workshop areas. Gives a high gloss, thick, tough finish with good chemical resistance.

Where a normal DIY single pack paint might give you 6 months, this will give you 4-5 years. Other colours available - please state when ordering.

View our colour chart here... paint colour chart

DIY Applications

• Workshop floor paint
• Garage floor paint
• Utility room floor paint
• Kitchen floor paint

Professional Applications

• Car park floor paint
• Workshop floor paint
• Garage floor paint
• Manufacturing area floor paint
• Factory floor paint
• Warehouse floor paint
• Medium duty area floor paint
• Heavy duty area floor paint

Coverage

One 6kg unit covers up to 20 m² (200 sq ft) in one coat. Goes onto concrete, screed, wood. Life expectancy is slightly reduced on tarmac or ashphalt.

How to Step-by-Step

1. Clean and prepare floor
2. Mix resin and hardener together
3. Apply by roller or brush
4. Normally apply 2 coats