An epoxy which sticks to practically anything – even underwater!

Remmers Epoxy FAS 100 is the ultimate epoxy which quite literally sticks to anything!

Underwater, oily and damp surfaces, tiles - the whole lot. Contains special adhesion promoters which makes it perfect as a primer when you are wanting to paint or stick to a 'dodgy' surface.

Makes a great damp barrier.

Transparent with a straw coloured tint, this amazing and totally unique epoxy resin, once mixed, hardens to a super tough finish which sticks to all sorts of troublesome surfaces such as damp concrete, oily patches (within reason!) on floors, ceramic and terrazzo tiles, underwater repairs.

The bond is so strong that you will have to destroy the surface to remove it. At room temperature it hardens after 4-5 hours to give a final bond after a few more hours which is almost impossible to break.

DIY Applications

• Floor primer
• Floor sealer
• Crack filler
• Void filler
• Underwater repairs
• Fast cure epoxy clear coating
• Laminating resin (use with glass fibre)
• Damp-proof barrier
• Sealer on oily floor patches (some oil, not loads and loads!)
• Wooden floor damp stopper
• Garage floor primer before painting
• Use on tiles, damp and 'dodgy' surfaces
• Repair mortar - fill with dry sand

Benefits

• Fast cure - 4 hours at room temperature
• Sticks to practically anything!
  

Asides its use as a primer you can fill with dry quartz sand to make a repair mortar or a levelling layer for rougher floors which need to be levelled before coating.

How to Step-by-Step

1. Open the two parts – resin and hardener.
2. Pour the hardener into the resin and then mix together completely, preferably using a drill and a special mixer.
3. Once fully mixed (3 minutes of mixing) allow it to sit in the can for no more than another minute before pouring, rollering or brushing out onto the surfaces.
4. The reaction will ensure that all of the mixed product is hardened within 4 hours.

Size

• 2.5kg