Transparent Epoxy BS 2000

Remmers Epoxy BS 2000 transparent is used as an impregnation agent, primer or adhesion promoter in surface protection systems. It is also used as a bonding layer when working wet-on-wet in combination with levelling compounds or water based epoxy resin systems.

A clear, 2 component, fast curing, water dispersed epoxy resin based floor paint for sealing, priming and coating concrete and other porous floor surfaces. It is used to prevent dusting, water penetration or chemical attack, plus as a good penetrative primer.

Normally for sealing concrete surfaces 2 coats are recommended on to the clean, dry and prepared surfaces, at a consumption of approximately 6 square metres per kg per coat, dependent on the porosity

BS 2000 is also used as an economical surface sealing primer for other floor paints and resin materials - especially Remmers BS 3000, coloured, water based epoxy floor paint for use as a high performance floor paint, easily cleaned concrete and render surfacing or wall coating.

DIY Applications

• Impregnation agent
• Primer
• Adhesion promoter
• Bonding layer
• Sealer
• Dustproofer