Concrete floor dustproofer and hardener

Bond IT Dustproofer and Hardener is a premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete floors. Produces a hard wearing, non-dusty surface. Suitable for use on garage, workshop, warehouse, factory or utility room floors.

Great for sealing and hardening concrete floors, both new and old concrete floors, in concrete garage floors, concrete warehouse floors, concrete factory floors and concrete workshop floors.

It soaks into the concrete to produce a non-dusting hard wearing surface with improved resistance to oils, greases and water.

DIY Applications

• Garage floor dustproofer
• Garage floor sealer
• Workshop floor dustproofer
• Workshop floor sealer
• Utility room floor dustproofer
• Utility room floor sealer
• Garden shed concrete floor dustproofer
• Garden shed concrete floor sealer
• Concrete floor sealer
• Concrete floor hardener

Professional Applications

• All the above plus...
• Warehouse floor dustproofer
• Warehouse floor sealer
• Factory floor dustproofer
• Factory floor sealer

How to Step-by-Step

1. Apply a uniform, thin coat onto the surface brushing in well - do not allow to puddle.
2. Once the first coat has cured (normally overnight) apply a second coat.
3. Very porous surfaces may need further applications.
4. After last application leave for 24 hours to allow final coat to dry.

Coverage

3-5m² per litre depending on porosity of the floor.

Note

Do not use on masonry or coloured concrete. Very dense powder floated floors may not permit effective penetration.

Do not wash floor for at least 24 hours after final coat.