Watch the video to see how easy it is to create a tough, great looking floor for your garage, workshop or utility room. Just like a car showroom!

How to Step-by-Step

1. Remove loose coatings from the floor by sanding or grinding
2. Hoover up the dust and particles
3. Open both the resin and the hardener and pour the small tin into the larger one
4. Mix with drill and mixing paddle
5. Apply by roller to the floor. Discard any mixed but unused material.
6. Allow to harden before use.

You will need

1. Drill mixing paddle
2. Epoxy roller
3. Epoxy BS 3000 SG Floor Paint
   

If you are looking for a really versatile epoxy, the Remmers Epoxy FAS 100 is a good choice. It quite literally sticks to anything – underwater repairs, oily or damp surfaces, ceramic and terrazzo tiles - the whole lot. Epoxy FAS 100 contains special adhesion promoters which makes it perfect as a primer when you are wanting to paint or stick to a 'dodgy' surface.

And what's more, it makes a great damp barrier!

Epoxy FAS 100 is transparent with a straw coloured tint, this epoxy resin, once mixed, hardens to a super-tough finish which sticks to all sorts of troublesome surfaces.

The bond is so strong that you will destroy the surface to remove it. At room temperature it hardens after 4-5 hours to give a final bond after a few more hours which is almost impossible to break.

What you can use it for:

• floor primer and sealer
• crack and void filler
• fast cure epoxy clear coating
• laminating resin (use with glass fibre)
• damp-proof barrier
• sealer on oily floor patches ( some oil, not loads and loads!)
• stop damp damaging wooden floors
• garage floor primer before painting
• use on tiles, damp and 'dodgy' surfaces
• fill with dry sand to make a repair mortar

Besides using it as a primer you can fill with dry quartz sand to make a repair mortar or a levelling layer for rougher floors which need to be levelled before coating.

It cures within 4 hours.

Buy Remmers Epoxy FAS 100 online