DIYsupermarket.com > DIY Blog


Special

Help

Tuesday, 23 February 2010

Damp and Waterproofing Slurry


Get rid of damp from your cellar or basement!

Simply brush this slurry on to damp walls in 2 or 3 coats allowing just 20 minutes in between and you have a fully damp-proofed cellar or basement in no time. Use Remmers Aida Kiesol as the primer.

Surely the only way to make your damp room dry?

A very clever cement based powder in a bag. Mix with water into a brushable slurry and brush onto damp walls which have been primed with Aida Kiesol. Super fast drying - you can waterproof your cellar or basement in a day!

The bond to the wall or floor is so strong that even high pressure water cannot get through.

Check out the cellar waterproofing brochure, this truly is the only sensible way to make your basement or cellar dry. Uncomplicated, fast and so easy to do! Use only on mineral surfaces such as stone, brick, rubble, concrete and such like.

What can I do with it...

  • Waterproof cellar walls
  • Damp-proof brick walls
  • Waterproof stone and rubble walls
  • Waterproof concrete walls
  • Waterproof floors
  • Waterproof underneath floor finishes
  • Waterproof tanks and bunds
  • Stop water getting in or out

How do I use it?

  1. Make sure the walls are free of anything which will stop the slurry sticking, such as paint, varnish, oils or other finishes. Remove these either by grinding or paint stripping.
  2. Prime the walls and floor with Remmers Aida Kiesol.
  3. Open the bag of slurry and mix the powder with water using a drill and whisk.
  4. Brush onto the surfaces.
  5. After 20 minutes to 1 hour you should apply a second coat of freshly mixed material.

Labels: , , , , , , , ,


 



Copyright © 2008-2009 DIYsupermarket.com – a Sennex Limited company  |  Design and Marketing by EQ MEDIA Ltd
All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of the DIYsupermarket.com Terms of Use and Privacy Policy.