DIYsupermarket.com > DIY Blog


Special

Help

Thursday, 3 December 2009

Ardex K 301 Multi-buys




Buy your Ardex K 301 in bulk

Shipping your Ardex K 301 is always going to be a bit pricey considering they weigh 25kg each. So, it's worth buying it in bulk so the cost can be spread out.

We've put together some bulk purchases of Ardex K 301 for your convenience.

Ardex K 301 5 Pack

Ardex K 301 10 Pack

Ardex K 301 20 Pack

Need a different amount? Let us know if there is a quantity you require other than these.

Labels: , ,


Monday, 14 September 2009

ARDEX Feather Finish


ARDEX Rapid Repair and Smoothing Systems includes ARDEX Feather Finish which has been specially forulated for thinner repairs. ARDEX Feather Finish is a rapid drying smoothing and patching compound which can be used on plywood, screed floors and existing ceramic floor tiles. The 11kg bags cover up to 50m² as skim coat and up to 10m² at 1mm thick. No primer is required.

Labels:


Tuesday, 21 July 2009

ARDEX K 301 for Concrete Repairs


ARDEX K 301 - Fast Setting Exterior Self-Smoothing Levelling and Resurfacing Compound

ARDEX K 301 is suitable for a wide variety of jobs, it's a really versatile product that's popular with flooring and building professionals and is usable by competant DIYers.

If you have damaged concrete surfaces inside or out it's perfect for making repairs.

ARDEX K 301 is great for repairing impact damaged drives, paths, balconies and patios.

ARDEX K 301 is often used by the trade for larger areas such as car parks, courtyards, playgrounds, etc. It can be applied by trowel or pump to pre-level floors prior to the application of a damp proof membrane.

Pack size: 25kg
Coverage: Approximately 1.6kg ARDEX K 301 powder/m²/ mm, i.e. approximately 7.8m² at 2mm thickness per 25kg bag.

ARDEX K 301 is a grey powder consisting of special cements, graded aggregates and high quality synthetic resins. When mixed with water, a fluid mortar is produced which sets within 2 hours and can normally be walked on after approximately 2-3 hours at 20°C. ARDEX K 301 can be applied from 2mm to 20mm in thickness. The set and hardened ARDEX K 301 is usually ready to receive light wheeled traffic after 48 hours at 20°C.

Note: ARDEX K 301 replaced the now defunct ARDEX K 300.

Labels: , ,


 



Copyright © 2008-2009 DIYsupermarket.com – a Sennex Limited company  |  Design and Marketing by EQ MEDIA Ltd
All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of the DIYsupermarket.com Terms of Use and Privacy Policy.