RAL is a colour matching system used in Europe. In colloquial speech RAL refers to the RAL CLASSIC system, mainly used for varnish and powder coating.

Which blue do you mean if you ask for sky blue for your epoxy floor? How can we make it absolutely clear which colour shade we really mean? This requires a common language which you can use to describe the exact colour you mean.

Fo almost 80 years, RAL has answered that question to ensure accurate desciption of colour worldwide: Colour define colour shades and give them definite number and names. This orders 100 approximate shades of blue into exactly 23 definite blue shades meeting the RAL CLASSIC standards, eg. RAL 5015 sky blue.

These are understandable for everyone and provide reliable orientation - and RAL 5015 sky blue is exactly the same colour shade all over the world and DIYsupermarket.com will supply you with the correct colour!

More about RAL Colours

Amazing tough high build epoxy coating for walls and floors. Silk Gloss. Can be used on any surface including damp concrete to get a tough coloured hard wearing finish.

Any colour from the RAL colour matching system you like at no extra cost within 24 hours. Water based and very very easy to use.

Just state the colour you require when ordering, and we will tint the product to your choice. Use this product for all locations where you require a hard wearing dust free coating. It can be used to paint over screeds, concrete, timber, plasterboard, bitumen, tarmac, most other paints.

• Very Fast drying
• No primer needed
• Clean tools with water
• Silk finish
• Solvent free
• Very easy to apply
• Good chemical resistance
• Slip resistant additive available

How to apply the paint

1. Clean up the floor, remove dust, oil or grease which may reduce the bond.
2. Open the base and hardener components using pliers.
3. Thoroughly mix the two together.
4. Apply by short pile roller to the floor.
5. Clean tools with water.

The paint will be touch dry in 2 hours and ready for foot traffic in 8 hours.

Normally 2 coats is advised for the best finish. Allow to dry between coats.