If you are looking for a really versatile epoxy, the Remmers Epoxy FAS 100 is a good choice. It quite literally sticks to anything – underwater repairs, oily or damp surfaces, ceramic and terrazzo tiles - the whole lot. Epoxy FAS 100 contains special adhesion promoters which makes it perfect as a primer when you are wanting to paint or stick to a 'dodgy' surface.

And what's more, it makes a great damp barrier!

Epoxy FAS 100 is transparent with a straw coloured tint, this epoxy resin, once mixed, hardens to a super-tough finish which sticks to all sorts of troublesome surfaces.

The bond is so strong that you will destroy the surface to remove it. At room temperature it hardens after 4-5 hours to give a final bond after a few more hours which is almost impossible to break.

What you can use it for:

• floor primer and sealer
• crack and void filler
• fast cure epoxy clear coating
• laminating resin (use with glass fibre)
• damp-proof barrier
• sealer on oily floor patches ( some oil, not loads and loads!)
• stop damp damaging wooden floors
• garage floor primer before painting
• use on tiles, damp and 'dodgy' surfaces
• fill with dry sand to make a repair mortar

Besides using it as a primer you can fill with dry quartz sand to make a repair mortar or a levelling layer for rougher floors which need to be levelled before coating.

It cures within 4 hours.

Buy Remmers Epoxy FAS 100 online