Slip resistant additive for all kinds of floor paints

Unique Remmers ADD 250 slip resistant additive for all kinds of floor paints. Simply empty these 250 micron (0.25mm) round polymer beads into the paint as you are mixing it and then just roller out onto the floor in the normal way. The beads disperse completley evenly and give a perfect light anti-slip profile which is still easy to clean.

Specifically designed for Remmers Epoxy BS3000 or Epoxy PH coatings, but also quite effective as an additive for other floor and wall paints to create an anti-slip paint.

Treated floors are still easy to clean.

DIY Applications

• Anti-slip additive for epoxy floor paint
• Floor paint anti-slip additive
• Create anti-slip paint
• Non-skid paint additive
• Anti-skid additive
  
• Alternative to ready mixed anti-slip floor paint

How to Step-by-Step

1. Simply tip the beads from the pot (this is a 250g pot) into the paint which you are using.
2. Mix it in thoroughly before rollering the paint out onto the floor, from a paint tray or paint kettle.

You should use 1 pot of beads for every 10kg (10kg is about the same as 7 litres) of paint to get a light non-slip profile or use twice the amount to get a more gripping surface.

You will get a lovely uniform finish as the beads disperse themselves evenly through the paint as it rolls out.